•After the font LCD screen has powered on. Press the [TEST] button (this must be done with in 30 seconds or the camera will enter count down mode)
•Close the front housing.
•Walk around in the front of the camera to see if you have mounted camera in the proper position. A green indicator light on the front will blink on when you have intruded the coverage area.
•Adjust the camera position as needed and repeat testing until the desired coverage area is achieved.
•When you have completed the testing the coverage area there are 2 methods for exiting the test mode:
a.Open the front housing and press the [TEST] button to exit test mode. The camera will then enter count down mode for 1 minute and front green indicator will start blinking giving you one
