minute to leave the coverage area. Then the camera will enter PIR detection mode.
b.After 5 minutes in test mode, the camera will then enter count down mode for 1 minutes and the front green indicator will start blinking giving you one minute to leave the coverage area. The camera will enter PIR detection mode.
4.Using the camera in PIR detection mode.
•Mount the camera to tree or other sturdy object using either two supplied tree screw or mounting strap (Please refer to the mounting suggestions section in this manual)
•Open the front housing and move the switch to the ON position. At this point you have 30 seconds to make any program adjustments.
