•After 30 seconds the camera’s green test light will begin blinking and enter count down mode. This is your indication to leave the coverage area with one minute.
•After one minute the camera will take between 1~3 pictures or a 10 seconds AVI video based on your program setting. The camera will then time out
between 1 ~ 60 minutes also based on your setting.
¾The time between motion detection and the camera taking the pictures may vary due to lighting conditions, charging of the flash, program setting and battery power level.
¾The flash lighting will only activate in low light conditions.
¾When the camera is set to AVI capturing, the 10 seconds clips will only turn out well in good daytime
