|
| TROUBLESHOOTING |
| |
|
|
| ||
Problem |
| Possible Cause |
| Possible Solution |
• Slow running, noisy or hot blades. |
| • Dry, corroded blades. |
| • Lubricate blades. |
|
| • Blades or blade support bent. | • Straighten blade or blade support. | |
|
| • Bent or damaged teeth. |
| • Straighten teeth. |
|
| • Loose blade bolts. |
| • Tighten blade bolts. |
• Unit will not start. |
| • Battery not installed properly. | • Check battery installation. | |
|
| • Battery not charged. |
| • Check battery charging requirements. |
|
| • Lock off not fully operated. |
| • Check that lock off is fully forward prior to |
|
|
|
| moving main trigger. |
• Battery wonʼt charge. |
| • Battery not inserted into charger. | • Insertbatteryintochargeruntil greenLED appears. | |
|
| • Charger not plugged in. |
| Charge up to 8 hours if battery totally drained. |
|
|
| • Plug charger into a working outlet. Refer to | |
|
|
|
| “Important Charging Notes” for more details. |
|
|
|
| • Check current at receptacle by plugging in a |
|
|
|
| lamp or other appliance. |
|
|
|
| • Check to see if receptacle is connected to a |
|
|
|
| light switch which turns power off when you turn |
|
| • Surrounding air temperature too hot | out the lights. | |
|
| • Move charger and tool to a surrounding air | ||
|
| or too cold. |
| temperature of above 40 degree F (4.5°C) or |
|
|
|
| below 105 degree F (+40.5°C). |
For assistance, visit our website | www.blackanddecker.com for the location of the service center nearest you or call the BLACK & | |||
DECKER help line at | Imported by | See | ||
| Black & Decker (U.S.) Inc., | – Yellow Pages – | ||
|
| 701 E. Joppa Rd. | for Service & Sales | |
| Towson, MD 21286 U.S.A. |
|
| |
|
| 11 |
|
|
