CyberPower Systems UP425 user manual

UP425

Guaranteed Uninterruptible Power System

◆Power Switch

Press the power button to turn the UPS ON or OFF

◆Power On Indicator

This LED is illuminated when the utility condition is normal and the UPS outlets are providing “clean power”, free of surges and spikes

◆Using Battery Indicator

This illuminates during utility failure, indicating that the battery is supplying power to the battery-power supplied outlets.

◆Battery Backup and Surge Protection Outlets

Provides three battery powered and surge protected outlets for connected equipment to insure temporary uninterrupted operation during a power failure and against surges and spikes.

◆Surge Protection Outlets

Provides three surge protected only outlets for connected equipment against surges and spikes

◆Wiring Fault Indicator

This LED indicator will illuminate to warn the user that a wiring problem exits with the AC outlet, such as bad ground, miss ground or reversed wiring. If this is illuminated, the user is advised to disconnect all electrical equipment from the outlet and have an electrician check the outlet to insure proper wiring.

◆Circuit Breaker Reset for Overload Protection

Circuit breakers provide optimal overload protection. When overload occurs, the circuit breaker will switch to battery mode. You will need to reset the circuit breaker so UPS will provide the power from utility.

◆Serial Port to PC

This port allows connection and communication from the DB-9 serial or USB port on the computer to the UPS unit. The UPS communicates its status to the PowerPanel Plus™ software. This interface is also compatible with the UPS service provided by Windows NT, Windows 2000 and Windows XP.

◆Ethernet (RJ-45) Network Protection Ports

These ports are the protection for your computer network cable, modem or telephone.

3