Computer Setup
The setup feature has four (4) main modes. You do not have to complete all four to change set- tings. Please reference each mode to determine the correct location to begin. NOTE: The com- puter illustrations for each mode display the factory default settings.
COMPUTER SETUP MAIN MENU
1)Press either [MODE] or [SELECT] to activate the computer. NOTE: The version of firmware is displayed upon startup. The most updated firmware version is available at www.cycleops.com. (FIGURE
FIGURE 26
Set
1 2 3 4 5
2) Extended hold of [MODE] and [SELECT] simultaneously enters com- puter setup function indicates by a flashing “E”. NOTE: Continue to hold through “clear all” screen. Releasing hold early will clear all current data.
3)The setup mode displays three (3) letters and numbers
E = exit, return to ride mode d = restore default settings T = test mode
1 2 3 4 5= setup menus
4) Press [SELECT] to scroll to the desired setup mode.
FIGURE 27
Set
5) Press [MODE] to begin setup. | Edt |
| 1 2 3 4 5 |
22
