CyClone 360 Fade or Flash Q10 RED, Pattern Direction Foward or Reverse, Pattern Q10 Green

Below are two charts for the Fade Time and Follow Time values.

Fade Time Value chart

Value	Function	Calculated Time
0	OFF	Fade Time OFF - Effects Disabled
1-50	Low Speed rate	Full Color fade time 3 minutes - 1 minute
51-100	High Speed Rate	Full Color fade time 1 minutes - 3 seconds
Follow Time Chart
Value	Function	Calculated Time
0-50	Follow Time Long	Follow Time 1 minute- 30 seconds
51-99	Follow Time Short	Follow Time 30 seconds - 1 second
100	OFF	Follow Time OFF

Play with the RED (Fade Time) and GREEN (Folow Time) dimmer values and see how they affect the speed of the of the circling GREEN Cluster. The disable the effects set the RED (Fade Time) to 0.

The Cyclone360 Q9 BLUE channel 9 is not used and reserved for future use.

Fade or Flash (Q10 RED)

The Cyclone360 can be set to fade or flash by adjusting Q10 RED dimmer. This is an easy adjustment dimmer levels 0 to 49 set the Cyclone360 to Fade setting the dimmer from 50 to 100 disables the Fade and set the Cyclone360 to flash through the selected colors. When Flash is enabled the Follow Time value is disabled.

Try it. Your Cyclone360 should still be circling a GREEN cluster. Press Q10 and Press the RED UP button until the display reads 100 or any value above 49. Wow thats fast.... Press Q9 then press RED DN button to slow the speed

of the Cyclone360. Play with the Fade Time (Q9 RED) value and see how it affects the speed of the circling GREEN cluster.

Pattern Direction (Foward or Reverse)

Here is a another easy one. Q10 BLUE will adjust the direction of the pattern Foward or Reverse. 0 to 49 sets the direction to Foward and 50 to 100 set the direction to Reverse. Go ahead and just give it a whirl.... no pun intended.

Pattern (Q10 GREEN)

This adjustment set the Cyclone360 to run 1 of 5 preset patterns. All the example effects we have been reviewing have been pattern 1 which is a simple circular pattern. Pattern 2 through 5 are a collection of patterns when used with multiple colored clusters along with fade time and follow time values will create some cool effects. Pattern table list the pattern and the dimmer level for each pattern

Pattern Number	Dimmer Level
1	0 to 20
2	21-40
3	41-60
4	61-80
5	81-100

4