CY62136VN MoBL®Document #: 001-06510 Rev. *A Page 3 of 12
Maximum Ratings
(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Storage Temperature..................................–65°C to +150°C
Ambient Temperature with
Power Applied.............................................–55°C to +125°C
Supply Voltage to Ground Potential............... –0.5V to +4.6V
DC Voltage Applied to Outputs
in High-Z State[4]....................................–0.5V to VCC + 0.5V
DC Input Voltage[4].................................–0.5V to VCC + 0.5V
Output Current into Outputs (LOW)............................ 20 mA
Static Discharge Voltage...........................................> 2001V
(per MIL-STD-883, Method 3015)
Latch-up Current.....................................................> 200 mA
Operating Range
Range Ambient Temperature [TA][5] VCC
Industrial −40°C to +85°C 2.7V to
3.6V
Automotive-A –40°C to +85°C
Automotive-E –40°C to +125°C
Electrical Characteristics Over the Operating Range
Parameter Description Test Conditions
-55 -70
UnitMin. Typ.[2] Max. Min. Typ.[2] Max.
VOH Output HIGH Voltage VCC = 2.7V, IOH = −1.0 mA 2.4 2.4 V
VOL Output LOW Voltage VCC = 2.7V, IOL = 2.1 mA 0.4 0.4 V
VIH Input HIGH Voltage VCC = 3.6V 2.2 VCC +
0.5V 2.2 VCC +
0.5V V
VIL Input LOW Voltage VCC = 2.7V –0.5 0.8 –0.5 0.8 V
IIX Input Leakage
Current GND < VI < VCC Ind’l –1 +1 –1 +1 µA
Auto-A –1 +1 –1 +1 µA
Auto-E –10 +10 µA
IOZ Output Leakage
Current GND < VO < VCC,
Output Disabled Ind’l –1 +1 – 1 +1 µA
Auto-A –1 +1 –1 +1 µA
Auto-E –10 +10 µA
ICC VCC Operating
Supply
Current
f = fMAX
= 1/tRC
VCC = 3.6V,
IOUT = 0 mA,
CMOS
Levels
Ind’l 7 20 7 15 mA
Auto-A 7 20 7 15
Auto-E 7 20
f = 1MHz Ind’l 1 2 1 2 mA
Auto-A 1 2 1 2
Auto-E 1 2
ISB1 Automatic CE
Power-down
Current—
CMOS Inputs
CE > VCC − 0.3V,
VIN > VCC − 0.3V or
VIN < 0.3V, f = fMAX
Ind’l 100 100 µA
Auto-A 100 100 µA
Auto-E 100 µA
ISB2 Automatic CE
Power-down
Current—
CMOS Inputs
CE > VCC − 0.3V
VIN > VCC − 0.3V or
VIN < 0.3V, f = 0
Ind’l 1 15 1 15 µA
Auto-A 1 15 1 15
Auto-E 1 20
Capacitance[6]
Parameter Description Test Conditions Max. Unit
CIN Input Capacitance TA = 25°C, f = 1 MHz,
VCC = VCC(typ)
6pF
COUT Output Capacitance 8 pF
Notes:
4. VIL(min) = –2.0V for pulse durations less than 20 ns.
5. TA is the “Instant-On” case temperature.
6. Tested initially and after any design or process changes that may affect these parameters.
[+] Feedback