Cypress CY7C1024DV33 Maximum Ratings, Operating Range, DC Electrical Characteristics, Capacitance

CY7C1024DV33

Maximum Ratings

Exceeding maximum ratings may impair the useful life of the device. These user guidelines are not tested.

Storage Temperature	–65°C to +150°C
Ambient Temperature with
Power Applied	–55°C to +125°C

Supply Voltage on VCC Relative to GND [2]....–0.5V to +4.6V

DC Voltage Applied to Outputs
in High Z State [2]	–0.5V to V + 0.5V
	CC

DC Input Voltage [2]		–0.5V to V + 0.5V
			CC
Current into Outputs (LOW)			20 mA
Static Discharge Voltage			>2001V
(MIL-STD-883, Method 3015)
Latch Up Current			>200 mA
Operating Range
Range	Ambient		VCC
	Temperature
Industrial	–40°C to +85°C		3.3V ± 0.3V

DC Electrical Characteristics

Over the Operating Range

Parameter	Description			Test Conditions [3]		–10		Unit
					Min		Max
VOH	Output HIGH Voltage	VCC = Min, IOH = –4.0 mA			2.4			V
VOL	Output LOW Voltage	VCC = Min, IOL = 8.0 mA					0.4	V
VIH	Input HIGH Voltage				2.0		VCC + 0.3	V
VIL[2]	Input LOW Voltage				–0.3		0.8	V
IIX	Input Leakage Current	GND < VI < VCC			–1		+1	μA
IOZ	Output Leakage Current	GND < VOUT < VCC, output disabled			–1		+1	μA
ICC	VCC Operating Supply	VCC = Max, f = fMAX = 1/tRC					175	mA
	Current	IOUT = 0 mA CMOS levels
ISB1	Automatic CE Power Down	Max VCC,		> VIH			30	mA
			CE
	Current —TTL Inputs	VIN > VIH or VIN < VIL, f = fMAX
ISB2	Automatic CE Power Down	Max VCC,		> VCC – 0.3V,			25	mA
			CE
	Current — CMOS Inputs	VIN > VCC – 0.3V, or VIN < 0.3V, f = 0

Capacitance

Tested initially and after any design or process changes that may affect these parameters.

Parameter	Description	Test Conditions	Max	Unit
CIN	Input Capacitance	TA = 25°C, f = 1 MHz, VCC = 3.3V	8	pF
COUT	I/O Capacitance		10	pF

Thermal Resistance

Tested initially and after any design or process changes that may affect these parameters.

Parameter	Description	Test Conditions	119-Ball	Unit
			PBGA
ΘJA	Thermal Resistance	Still air, soldered on a 3 × 4.5 inch,	20.31	°C/W
	(Junction to Ambient)	four layer printed circuit board
ΘJC	Thermal Resistance		8.35	°C/W
	(Junction to Case)

Notes

2.VIL (min) = –2.0V and VIH(max) = VCC + 2V for pulse durations of less than 20 ns.

3.CE refers to a combination of CE1, CE2, and CE3. CE is LOW when CE1, CE3 are LOW and CE2 is HIGH. CE is HIGH when CE1 is HIGH, or CE2 is LOW, or CE3 is HIGH.

Document Number: 001-08353 Rev. *C Page 3 of 9

[+] Feedback