D-Link 700AP manual Home Dhcp

DWL-700AP User’s Manual Using the Configuration Utility

Using the Configuration Utility (continued)

Home > DHCP

DHCP Server: Select Enabled or Disabled. Disabled is the default setting. If you want to use the access point as a DHCP server to automatically assign dynamic IP

addresses on the network, you will select Enabled.

Starting IP Address: If you have enabled the DHCP server function, enter the starting point of the IP address range for your network.

Ending IP Address: Enter the ending IP address of your IP address range, if you have enabled the DHCP function of the access point.

Lease Time: Choose the length of time during which the DHCP function of the DWL-700AP automatically regenerates the IP addresses to the devices in your

network.

DHCP Client Table: Lists the devices on your network that are receiving dynamic

IP addresses from the access point.

D-Link Systems, Inc. 13