DWL-700AP User’s Manual

Using the Configuration Utility

Using the Configuration Utility (continued)

Advanced > Performance

The default Performance settings are shown here. Beacon Interval: Beacons are

packets sent by an access point to synchronize a wireless network. Specify a beacon interval value. Default (100) is recommended.

RTS Threshold: This value should remain at its default set- ting of 2,437. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2,437 are rec- ommended.

Fragmentation: This value

should remain at its default setting of 2,347. If you experience a high packet error rate, you may slightly increase your fragmentation threshold within the value range of 256 to 2,346. Setting the fragmentation threshold too low may result in poor performance.

DTIM Interval (Beacon Rate): (Delivery Traffic Indication Message) Enter a value between 1 and 255 (default is 3) for the Delivery Traffic Indication Message. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.

Basic Rates: Default is 2Mbps. We recommend that you keep the setting at default. If you lose connection at the TX rate, you will regain connection at the basic rate. A lower basic rate will make reconnection easier.

TX Rates: Select the transmission rate for the network. The default rate is 11Mbps.

Preamble: Long Preamble is the default setting. (High traffic networks should use the shorter preamble type.) The preamble defines the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data transmission errors) used in communication between the access point and the roaming wireless network adapters.

Authentication:

Open System - communicates the key across the network.

Shared Key - devices must have identical WEP settings to communicate. Auto - automatically adjusts to the Authentication mode of the wireless client.

SSID Broadcast: (Service Set Identifier) Enable or Disable (default) the broadcast of the SSID name across the network. SSID is a name that identifies a wireless network. All devices on a network must use the same SSID to establish communication.

D-Link Systems, Inc.

15

Page 14 Page 16
Page 15
Image 15
D-Link 700AP manual Advanced Performance, Fragmentation This value
Page 14 Page 16

700AP specifications

The D-Link 700AP is a robust wireless access point designed to enhance the networking experience in both home and business environments. Known for its reliability and ease of use, the 700AP provides seamless connectivity for multiple devices, making it ideal for various applications ranging from casual browsing to heavy-duty streaming and gaming.

One of the standout features of the D-Link 700AP is its support for the 802.11n wireless standard, which allows for data transfer rates of up to 300 Mbps. This enhances overall network performance, particularly in environments with multiple users or devices. With backward compatibility for older standards like 802.11g and 802.11b, the 700AP ensures that all your legacy devices can connect without issues.

The device also boasts a range of wireless security features, including WPA/WPA2 encryption and Wi-Fi Protected Setup (WPS). These features help protect your network from unauthorized access while simplifying the process of connecting new devices. With these security measures in place, users can enjoy peace of mind knowing that their data is secure.

Another notable characteristic of the 700AP is its versatility. It can be configured in several modes, including Access Point mode, Bridge mode, and Repeater mode, allowing users to tailor the network to their specific needs. Whether you need to extend your existing network, connect wired devices wirelessly, or bridge two networks, the 700AP can adapt to your requirements.

In terms of physical design, the D-Link 700AP is compact and can be mounted on walls or ceilings, making it suitable for a variety of installation scenarios. Its LED indicators provide real-time status updates for power, wireless connectivity, and network activity, facilitating easier troubleshooting and monitoring of device performance.

The access point is powered using Power over Ethernet (PoE), which allows for flexible installation since it can receive power through the Ethernet cable, eliminating the need for a separate power source.

Overall, the D-Link 700AP stands out as a practical and effective solution for anyone looking to enhance their wireless network. With its combination of speed, versatility, and security features, it is an excellent choice for users seeking reliable connectivity in both residential and commercial settings.
Top Page Image Contents