D-Link DCM-202 manual Configuring TCP/IP on the Windows 2000 Operating Systems

Configuring TCP/IP on Windows 95, Windows 98, and Windows Me continued

2 Look for an entry named TCP/IP. If you see TCP/IP listed next to your Ethernet hardware device, you can now go to the section “Connecting the Cable Modem”. However, if TCP/IP is not listed, you must complete the following steps.

aClick Add.

bClick Protocol and click Add.

cClick Microsoft in the Manufacturers list and Click TCP/IP in the Network Protocols list.

dClick OK.

eClick Yes when prompted to restart your computer.

You can now connect the cable modem. See “Connecting the Cable Modem” for the instructions.

Configuring TCP/IP on the Windows 2000 Operating Systems

To configure TCP/IP on your Windows 2000 PC:

1 Right-click the My Network Places icon on the Windows desktop

2 Right-click Local Area Connection and click Properties. Look for an entry named TCP/IP. If you see TCP/IP listed next to your Ethernet hardware device, you can now go to the section “Connecting the Cable Modem.” However, if TCP/IP is not listed, you must complete the following steps.

a Scroll to the Internet Protocol TCP/IP option.

b Click to place a check mark in the Internet Protocol check box c Click OK.

d You can now connect the cable modem. See the section “Connecting the Cable Modem” for the instructions.

11