Setup Utility (Intel Pentium 4 Models)
Change Supervisor Password Screen
The Change Supervisor Password screen is used to change the supervisor password. The default setting is no password. Once a password is set, a user must enter the password to change parameters using the Setup Utility.
Enter the new supervisor password in the dialog box, and then press the Enter key.
To remove or disable the set password, enter the current password, then press Enter when prompted to enter a new password.
Clearing CMOS clears the
You can configure the system to use the same password for both power up and Setup utility entry. To do this, use the Advanced CMOS Setup menu option, highlight Password Check, and then select the Always option.
Clearing passwords clears both the Supervisor and
Passwords, but does not clear the Always option. To reset only the
Supervisor Password, change Always to Setup on the Available
Options list.
Auto Configuration with Optimal Settings Screen
The Auto Configuration with Optimal Settings screen is used to load configuration settings that give the highest performance to the system. The system is shipped with these settings as the default. Use this option to return the system to optimal performance.
To load the high performance configuration settings, choose Y when prompted by the dialog box, and then press the Enter key.
Compaq Evo D300v User’s Guide |
