Setup Utility (Intel Celeron Models)
Computer Setup (Continued)
Heading | Option | Description |
Security | Device Security | Enables/disables Serial ports A and B, parallel |
(continued) |
| ports, USB ports, system audio security, |
|
| network controllers (some models), and SCSI |
|
| controllers. |
|
|
|
| Network Service Boot | Enables/disables the computer’s ability to boot |
|
| from an operating system installed on a |
|
| network server. (Feature available on NIC |
|
| models only; the network controller must reside |
|
| on the PCI bus or be embedded on the system |
|
| board.) |
|
|
|
| System IDs | Allows you to set: |
|
| • Asset tag |
|
| Tag |
|
| POST) |
|
| • Chassis serial number or Universal Unique |
|
| Identifier (UUID) number if current number |
|
| is invalid (these ID numbers are normally |
|
| set in the factory and are used to uniquely |
|
| identify the system) |
|
| • Keyboard locale setting (e.g., English or |
|
| German) for System ID entry |
|
|
|
| Password Options | Allows you to: |
|
| • Enable/disable network server mode. |
|
| This selection will appear only if a |
|
| |
|
| • Specify whether password is required for |
|
| warm boot (CTRL+ALT+DEL). |
|
| This selection is available only when |
|
| Network Server Mode is disabled. |
Support for Computer Setup options may vary depending on your specific hardware configuration.
Compaq Evo D300v User’s Guide |
