![](/images/new-backgrounds/1266636/26663665x1.webp)
Setup Utility (Intel Pentium 4 Models)
■System Temperature
■CPU Fan Speed
■Chassis Fan Speed
■Vccp
■+1.5V
■+1.8V
■+3.3V
■+5.0V
■+12.0V
■HVCC (+3.3 VSB)
Auto-Detect Hard Disks Screen
The
If a new hard disk is installed, choosing the
Change User Password Screen
The Change User Password screen is used to change the user password. The default setting is no password. Once a password is set, a user must enter the password to change parameters using the Setup Utility.
The supervisor password must be set to enable the use of a user password.
Enter the new user password in the dialog box, and then press the
Enter key.
To remove or disable the set password, enter the current password, then press Enter when prompted to enter a new password.
Compaq Evo D300v User’s Guide |