Section 1 - Product Overview

Hardware Installation

Connect the Ethernet Cable

Connect an Ethernet cable to the network cable connector located on the Network Camera’s back panel and attach it to the network.

Attach the External Power Supply

Attach the external power supply to the DC power input connector located on the Network Camera’s back panel (labeled DC 12V) and connect it to an AC power outlet.

Note: When you have a proper connection, the LED will turn green. The light may cycle on and off and your computer may show an intermittent loss of connectivity, this is normal until you have configured your Network Camera.

Connect Using Power-Over-Ethernet

Once you connect an Ethernet cable to your PoE switch or adapter, the Power LED on the DCS-3410 will turn green to indicate a proper connection.

D-Link DCS-3410 User Manual

Page 8
Image 8
D-Link DCS-3410 manual Hardware Installation, Connect the Ethernet Cable, Attach the External Power Supply