D-Link DCS-931L user manual Wireless Setup

Section 3 - Configuration

Wireless Setup

This section allows you to set up and configure the wireless settings on your camera.

Enable Check this box to allow your camera to connect to your network wirelessly.

Wireless:

SSID: Enter the network name(SSID) of the wireless network you want to connect to. You can also click the Site Survey button below to choose an available network and fill in settings automatically.

Channel: If you are using Ad-Hocas your connection mode, select the same channel that is being used by yourwireless network.

Connection Select the connection mode used by your wireless network. In most cases, Mode: you should select Infrastructure. Ad-Hocis only used if your camera is

directly connecting to another PC or device.

Site Survey: Clicking this button will allow you to select an available wireless network to connect to, and will fill in the necessary settings for you.

Wireless Select the wireless security mode used by your wireless network. If you Security Mode: select WEP or WPA-PSK/WPA2-PSK, enter the password for your wireless

network in the text box that appears.

D-Link DCS-931L User Manual 25