Monitor List | D-Link DES-1252 specs

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows the appointed description for the device location.

Trap IP: Shows the IP where the Trap information will be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

Group Interval: Shows the Group Interval of the device.

Monitor List

All Web-Smart devices in the Monitor List can be monitored, with Trap information available to be received for monitoring status information of the device.

Definitions of the Monitor List functions and terms:

S:Shows the system symbol of the Web-Smart device, represents the device system is inactive.

IP Address: Shows the current IP address of the device.

MAC Address: Shows the device MAC Address.

Protocol version: Shows the version of the Utility protocol.

Product Name: Shows the device product name.

System Name: Shows the appointed device system name.

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows the appointed description for the device location.

Trap IP: Shows the IP where the Trap to be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

23

Image 28

D-Link DES-1252 user manual Definitions of the Monitor List functions and terms

Contents

DES-1252 Table of Contents Page Iii Page Purpose Terms/Usage Gigabit Ethernet Technology Introduction Switching Technology Fast Ethernet Technology Features IEEE802.1X Port-based Access Control Technical Specifications Key Components / Performance Switching CapacityForwarding Mode Max. Forwarding Rate Sdram for CPU Flash MemoryPort Functions Combo ports Chassis Dimensions Reset button onTemperature 1000Mbps Copper Storage Temperature Power consumptionEmission EMI and Safety Certifications Humidity Installation Unpacking Rack Mounting Attach the adhesive rubber pads to the bottom Connecting Network Cable Attach the mounting brackets to the Switch AC Power Reset button LED IndicatorFront Panel 10/100 BASE-TX Twisted Pair Ports Port 1~48 Rear Panel AC Power Connector10/100/1000 BASE-T Twisted Pair Ports Port 51~52 Power and System LEDs Understanding LED IndicatorsPower LEDs Ports 1 ~ 48 Status LEDs Link/Act Ports 51~52 10/100/1000 Base-T LEDs Link/Act Link/Act for UTP ports10/100Mbps shown in Amber Light Page Installing the SmartConsole Utility Supported web browsers SmartConsole Utility Features Menu Toolbar Option includes Refresh Time and Group Interval functions Definitions of the Discovery List features Discovery List Monitor List Definitions of the Monitor List functions and terms View trap Device Setting This space has been intentionally reserved for notes Firmware Upgrade Login Web-based Management Log in screen Tool Menu Tool Menu Setup Menu Tool Menu Firmware Backup and Upload System System Setting C P System Trap Setting System System Setting System Port Setting System Trap Setting System Port Setting System Snmp Setting System Snmp Setting System Password Access Control Configuration 802.1Q Vlan Configuration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Trunking Configuration 802.1Q Vlan VID Assignments Configuration Igmp Snooping Configuration Igmp Snooping ConfigurationPage Page Configuration 802.1D Spanning Tree Configuration Igmp Router port Settings Configuration Spanning Tree Page Configuration Port Mirroring Configuration Port Mirroring QoS 802.1p Default Priority Security Safeguard Engine Security 802.1X Setting Security Broadcast Storm Control Security 802.1X Setting Page Security Mac Address Table Static Mac Security Static Mac Address Security Mac Address Table Dynamic Forwarding Table Monitoring Statistics Monitoring Statistics Monitoring Port Statistics