System Overview, Viewing the Device | D-Link DGS-3100 specification

System Overview

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

System Overview

The DGS-3100 series and the DGS-3100-24TG Gigabit Ethernet Switches enhance networks by providing a powerful switch that eliminates network bottlenecks, enabling network administrators to fine tune network configurations.

The DGS-3100 series and the DGS-3100-24TG are perfect for departmental and enterprise connections, and are ideal for backbone and server connections.

Viewing the Device

The devices described in this section are stackable Gigabit Ethernet Managed Switches. Device management is performed using an Embedded Web Server (EWS) or through a Command Line Interface (CLI). The device configuration is performed via an RS-232 interface. This section contains descriptions for the following:

•DGS-3100 series Front Panel

•DGS-3100-24TG Front Panel

DGS-3100 Series Front Panel

The DGS-3100 series provides 24/48 high performance 1000BASE-T ports. The 1000Base-T ports operate at 10/100/1000, and connect to backbones, end-stations, and servers. The DGS-3100 series also provides 4 Mini-GBIC (SFP) combo ports which connect fiber optic media to switches, servers, or network backbone. The DGS-3100 series provides an additional RS-232 port (console port) for managing the switch via a console terminal or PC with a Terminal Emulation Program.

Figure 1 DGS-3100 Series 48 Port Front Panel

DGS-3100 Series Front Panel

The DGS-3100-24TG provides eight high performance 1000BASE-TX ports. The ports operate at 10/100/1000, and connect to backbones, end-stations, and servers. The DGS-3100-24TG also provides 16 Mini-GBIC (SFP) ports which connect fiber optic media to switches, servers, or network backbone. The DGS-3100-24TG provides an additional RS-232 port (console port) for managing the switch via a console terminal or PC with a Terminal Emulation Program.

Figure 2 DGS-3100-24TG Front Panel

ii

Image 7

D-Link user manual System Overview, Viewing the Device, DGS-3100 Series Front Panel, DGS-3100 Series 48 Port Front Panel

Contents

User Manual D-Link DGS-3100 SERIES GIGABIT STACKABLE MANAGED SWITCHV2.20 Precaución FCC WarningCE Mark Warning Warnung Table of Contents Defining SNMP Host Table Configuring Port Security System Overview Viewing the Device Device Management Methods PrefaceDGS-3100 Series Gigabit Stackable Managed Switch User Manual Safety Cautions General Precautions for Rack-Mountable Products Figure 1 DGS-3100 Series 48 Port Front Panel System OverviewViewing the Device DGS-3100 Series Front Panel SNMP-Based Management Device Management MethodsCommand Line Console Web Based Management Interface NOTE A NOTE indicates important information that helps you make better use of your device Safety CautionsUser Guide Overview Notes, Notices, and Cautions The product has been exposed to water The power cable, extension cable, or plug is damagedUnplug the power cable before removing the power supply An object has fallen into the product General Precautions for Rack-Mountable Products Protecting Against Electrostatic Discharge Battery Handling Reminder View Using the Web-Based User InterfaceGETTING STARTED Understanding the D-Link Embedded Web Interface Information View Figure 1-1. Device Information Page1. Tree View 2. Device 1. Click Device Locator. The Device Locator Page opens Using the Tool MenuDisplaying the Stack Status Locating Devices Figure 1-3 Config Backup and Restore Page Backing up and Restoring Configuration FilesField Http TFTP 1. Click Reset. The Factory Reset Page opens Resetting the DeviceFigure 1-4 Factory Reset Page 1. Click Firmware Download. The Firmware Download Page opens Downloading the FirmwareFigure 1-5 Firmware Download Page Field HTTP Download TFTP Download 2. Define the Select Unit to Reboot field Rebooting the System1. Click System Reboot. The System Reboot Page opens Figure 1-6 System Reboot Page Description Using the Web System ComponentsComponent Name CONFIGURING BASIC CONFIGURATION Firmware Version Hardware Version System Time System Up Time Viewing Device InformationFigure 2-1 Device Information Page Field Device Type System Contact System Name System Location BPDU Forwarding IGMP Snooping Broadcast Storm Control 802.1X Status Field Boot Version MAC Address IP Address Subnet Mask Default GatewayLogin Timeout minutes Time Source 802.1D Spanning Tree DHCP Client Safeguard Engine SNMP Trap SSL GVRP Setting Jumbo Frames Figure 2-2 System Information Page Defining System InformationSystem Contact System Name System Location Login Timeout minutes 3. Define the System Location and Login Timeout minutes fields Field Defining IP Addresses1. Click Configuration IP Address. The IP Address Page opens Figure 2-3 IP Address Page Allocating Unit IDs Managing StackingManaging Stacking Modes Advanced Stacking Defining a Stacking Back Up Master Master Enabled Stacking MembersAssigning Unit IDs Defining a Stacking Master Discovering the Stacking Master Stack Startup ProcessElecting a Stacking Master Allocating Unit IDs/Resolving Unit ID Conflicts Unit and Stacking Port Configuration Managing a New Manually Ordered Stack Building Stacks - Quick StartStack Resiliency Managing a Self-Ordered Stack Adding Stacking Members to an Existing Manually Ordered Stack Stack Management ExamplesReplacing Failed Stacking-Members in a Running Stack Building New Manually Ordered Stacks Replacing a Failed Stack Master Dividing Stacks Page Stacking Cable Failure Merging StacksInserting Excess Stacking Members When switches are added to a running stack, the Unit ID Allocation and Duplicate ID Conflict Resolution process detects an error if too many switches are present in the stack, and no changes are to stacking members that originally belonged to the group managed by the newly elected master. The original switches retain their ID assignments and configurations. The stacking members that originally belonged to the group managed by the Stack Master that lost the Master Election process are shut down Figure 2-4 Stacking Settings Page Configuring StackingField Stacking Master Current Stack ID New Stack ID after reset Field Unit From Port To Port State Speed Configuring Port PropertiesDefining Ports Figure 2-5 Port Setting Page Field Flow Control Learning From Port Viewing Port PropertiesFigure 2-6 Port Description Page Unit Static ARP Settings ARP Settings1. Click Configuration ARP Settings. The ARP Settings Page opens Figure 2-7 ARP Settings Page Figure 2-8 User Accounts Page Configuring User Accounts1. Click Configuration User Accounts. The User Accounts Page opens Field User Name New Password Access Right Confirm New Password 1. Select an entry 2. Click . The user account is deleted, and the device is updatedTo edit the User Accounts Page 1. Select a name on the User List 2. Click 3. Define the value Severity Managing System LogsFigure 2-9 System Log Host Page Index Time level T1 T2 T3 T4 Configuring SNTPStratum Stratum Stratum Stratum Example Current Time Figure 2-10 Time Settings PageField Time Setting Time in HH MM SS Time Source Configuring Daylight Savings Time Figure 2-11 TimeZone Settings Page Field From Which Week of the Month From Day of Week From Month DST Repeating Settings SectionsField Daylight Savings Time State Daylight Saving Time Offset in Minutes Time Zone Offsetfrom GMT Field FromMonth FromDay FromTime ToMonth ToDay ToTime DST Annual Settings Section Parameters Authentication Privacy Key Management Configuring SNMP 2. Define the View Name, Subtree OID and View Type fields Defining SNMP ViewsFigure 2-12 SNMP View Table Page Field View Name Subtree OID View Type Community/View TestReadView PWriteView PrivateView Defining SNMP GroupsFigure 2-13 SNMP Group Table Page Field Group Name Read View Name Write View Name Field Notify View Name Security Model Security Level Field User Name Group Name SNMP V3 Encryption Defining SNMP UsersAuth-Protocol by Password Password Confirm Password Figure 2-14 SNMP User Table Page Confirm Key Auth-Protocol by Key2. Define the User Name, Group Name, and SNMP V3 Encryption fields Figure 2-15 SNMP Community Table Page Defining SNMP CommunitiesAccess Rights 2. Define the Community Name, and View Name, Access Right fields To define the SNMP Host Table Page Defining SNMP Host TableFigure 2-16 SNMP Host Table Page SNMP Version Host IP AddressCommunity String / SNMPv3 User Name Field Engine ID Use Default Defining SNMP Engine IDFigure 2-17 SNMP Engine ID Page Figure 2-18 SNMP Configuration Trap Page Enabling SNMP TrapsField SNMP Traps SNMP Authentication Traps Figure 2-19 DHCP Auto Configuration Page DHCP Auto ConfigurationField DHCP Auto Configuration Figure 2-20 Firmware Information Page Dual Image ServicesFirmware Information Field Unit Image Version Update Time Image Config Firmware ImageFigure 2-21 Config Firmware Image Page Defines the image file used for reboot. The possible values are CONFIGURING L2 FEATURES Field Jumbo Frame Enabling Jumbo Frames1. Click L2 Features Jumbo Frame. The Jumbo Frame Page opens Figure 3-1. Jumbo Frame Page Notes about VLANs on the DGS-3100 Series Configuring VLANsUnderstanding IEEE 802.1p Priority VLAN Description Figure 3-2. IEEE 802.1Q Packet Forwarding Term Untagging Ingress port Egress port Figure 3-3. IEEE 802.1Q Tag 802.1Q VLAN TagsFigure 3-4. Adding an IEEE 802.1Q Tag Tagging and Untagging Port VLAN IDIngress Filtering Switch Ports Default VLANsVLAN and Trunk Groups VLAN Status Field VID VLAN Name Untag VLAN Ports Tag VLAN Ports Defining VLAN Properties1. Click L2 Features 802.1Q VLAN. The VLAN Configuration Page opens Figure 3-5. VLAN Configuration Page Figure 3-6. Add/Edit VLAN Information Page 1. Click L2 Features GVRP Settings. The GVRP Setting Page opens Configuring GVRPFigure 3-7. GVRP Setting Page Acceptable Frame Type Field GRVP Global Setting Unit From Port To Port PVID GVRP Ingress4. Define the PVID, GVRP, Ingress, and Acceptable Frame Type fields Field Unit Group ID Type Ports Defining Trunking1. Click L2 Features Trunking. The Trunking Configuration Page opens Figure 3-8. Trunking Configuration Page Notes about Trunking on the DGS-3100 Series Forwarding Ports Traffic SegmentationFigure 3-9. Traffic Segmentation Page Source Ports 4. Define the Port-Priority and LACP Timeout fields Configuring LACPFigure 3-10. LACP Port Settings Page Timeout Figure 3-11. IGMP Snooping Page Defining IGMP Snooping1. Click L2 Features IGMP Snooping. The IGMP Snooping Page opens Leave Timer 2. Click . The Static Router Ports Settings Page opens Host TimeoutRouter Timeout Static Router Port Setting Edit button Ports Static Router PortsDynamic Router Ports Field Status Unit Target Port Source Port Configuring Port Mirroring1. Click L2 Features Port Mirroring. The Port Mirroring Page opens Figure 3-13. Port Mirroring Page 2. Define the Status, Unit, and Target fields 4. Define the Unit, Tx, and Rx. fields under Source Port SettingField None Defines that port mirroring is not applied to the ports Version Classic STP Rapid STP Multiple STP Configuring Spanning Tree STP Version Defining Spanning Tree Global ParametersFigure 3-14. STP Bridge Global Settings Page STP Status Bridge Forward Delay Bridge Priority 0Bridge Max Age 6 Bridge Hello Time 1 Figure 3-15. STP Port Settings Page Defining STP Port SettingsField Unit From Port To Port Cost 0=Auto Field Edge Forwarding BPDU P2P State Revision Level Defining Multiple Spanning Tree Configuration IdentificationFigure 3-16. MST Configuration Identification Page Configuration Name Figure 3-17. MSTI Config Information Page Defining MSTP Port InformationField Unit Port Instance ID Internal Path Cost Priority Status 4. Define the Internal Path Cost and Priority fields Field Role Field Aging Time VID MAC Address Unit Port Defining Forwarding and FilteringDefining Unicast Forwarding Figure 3-18. Unicast Forwarding Page Egress Defining Multicast ForwardingFigure 3-19. Multicast Forwarding Page Multicast MAC Address 3. Select either all, or individual ports 4. Click To restore the default settings 1. ClickThe default settings are restored The entry is deleted, and the device is updated Configuring 1p CONFIGURING QUALITY OF SERVICE Figure 4-1. Mapping QoS on the Switch Understanding QoS No Limit Defining Bandwidth Settings1. Click QoS Bandwidth Control. The Bandwidth Control Page opens Figure 4-2. Bandwidth Control Page Broadcast Storm Broadcast and Multicast Storm Configuring Storm ControlFigure 4-3. Traffic Control Settings Page Field Unit From Port To Port Storm Control Type State Threshold 3500 Figure 4-4. 802.1P Default Priority Page Mapping Ports to Packet Priorities2. Define the Unit, From Port, To Port, Prioirity fields Figure 4-5. 802.1P User Priority Page Mapping Priority to Classes QueuesField Priority Class ID Field Class ID Mechanism Weight Configuring QoS Scheduling MechanismFigure 4-6. QoS Scheduling Mechanism Page Figure 4-7. Multi-Layer CoS Setting Page Defining Multi-Layer CoS Settings SECURITY FEATURES Field Safeguard Engine Configuring Safeguard Engine1. Click Security Safeguard Engine. The Safeguard Engine Page opens Figure 5-8. Safeguard Engine Page Figure 5-9.Trusted Host Page Configuring Trust HostField IP1 Access to Switch IP2 Access to Switch IP3 Access to Switch 1. Click Security Trusted Host. The Trusted Host Page opens Figure 5-10. Port Security Page Configuring Port SecurityField Unit From Port To Port Admin State Max Address0-64 Port 1. Click Security Port Security. The Port Security Page opens Figure 5-11 Guest VLAN Page Configuring Guest VLANsField Max Learning Addr 1. Click Security Guest Vlan. The Guest VLAN Page opens Component Authenticators Supplicants/Clients Authentication Server Configuring Port AuthenticationState Controlled Access Uncontrolled Access ServerTimeout 1-65535 sec 1. Click Security 802.1X Setting. The 802.1X Setting Page opensFigure 5-12. 802.1X Setting Page SuppTimeout 1-65535 sec Mode Control ReAuthEnabled 1. Click Security 802.1X Setting. The 802.1X Setting Page opensSuppTimeout 1-65535 sec ServerTimeout 1-65535 sec Unit FieldDescription ControlPage DGS-3100 Series Gigabit Stackable Managed Switch User Manual DGS-3100 Series Gigabit Stackable Managed Switch User Manual Figure 5-13. Authentic RADIUS Server Page Defining RADIUS SettingsField Succession RADIUS Server Authentic Port Accounting Port Key 1. Click Security SSL. The SSL Configuration Settings Page opens Configuring Secure Socket Layer Security Field SSL Status Ciphersuite Status Figure 5-14. SSL Configuration Settings Page Figure 5 -15. SSH Configuration Page Configuring Secure Shell SecurityField SSH Server Status Port Defining SSH Algorithm Settings Data Integrity Algorithm Figure 5-16. SSH Algorithm Settings PagePublic key Public Key Algorithm Figure 5-17. Application Authentication Settings Page Defining Application Authentication SettingsField Application Login Method List Enable Method List Protocol Configuring Authentication Server HostsFigure 5-18. Authentication Server Host Page Timeout 1-30secs Figure 5-19. Login Method Lists Page Defining Login MethodsField Method List Name Method Method Description are Field Method Method Figure 5-20. Enable Method Lists Page Defining Enable MethodsField Method List Name Method Field Method Method Method Provide the current network Enable password Configuring Local Enable PasswordFigure 5-21. Configure Local Enable Password Page Old Local Enable Password MONITORING THE DEVICE Field Master ID Backup ID Box ID Runtime version H/W version Viewing Stacking InformationFigure 6-1 Stacking Information Page Field Utilization Time Interval Record Number Show/Hide Viewing CPU Utilization1. Click Monitoring CPU Utilization. The CPU Utilization Page opens Figure 6-2. CPU Utilization Page Figure 6-3. Port Utilization Page Viewing Port UtilizationField Unit Port Utilization Time Interval Record Number Show/Hide Field Unit Port Packet Size Analysis - Selected Port Number Viewing Packet Size Information1. Click Monitoring Packet Size. The Packet Size Page opens Figure 6-4. Packet Size Page Field Unit Port Bytes Packets Time Interval Record Number Show/Hide Viewing Received Packet Statistics1. Click Monitoring Packets ReceivedRX. The ReceivedRX Page opens Figure 6-5. ReceivedRX Page Field Unit Port Unicast Multicast Broadcast Time Interval Viewing UMBcast Packet Statistics1. Click Monitoring Packets UMBcastRX. The UMBcastRX Page opens Figure 6-6. UMBcastRX Page Figure 6-7. TransmittedTX Page Viewing Transmitted Packet StatisticsField Unit Port Bytes Packets Time Interval Field Record Number Show/Hide Accepts Rejects Viewing RADIUS Authenticated Session StatisticsFigure 6-8. RADIUS Authentication Page Field Time Interval Server UDP Port Timeouts Requests Challenges Figure 6-9 Browse ARP Table Page Viewing ARP TableField VLAN Name IP Address Total Entries MAC Address Type Figure 6-10 Browse Router Port Page Viewing Router PortsField VID Unit Port Figure 6-11 Browse Session Table Page Viewing Session TableField ID From User Privilege Name Figure 6-12 IGMP Snooping Group Page Viewing IGMP Group InformationField VID VLAN Name VLAN Name Multicast Group MAC Address Port Figure 6-13 MAC Address Table Page Defining Dynamic and Static MAC AddressesField Unit Port VLAN Name MAC Address VID Type To clear dynamic entries, click 2. Select the Stacking member in the Unit field3. Define the Port, VLAN Name, and MAC Address fields 4. Click To view all entries, click To clear static entries, click Field ID Time Log Description Severity Viewing System Log1. Click Monitoring System Log. The System Log Page opens Figure 6-14 System Log Page MANAGING POWER OVER ETHERNET DEVICES PoE Enable Defining PoE System Information1. Click PoE PoE Port Setting. The PoE Port Setting Page opens Figure 7-1 PoE Port Setting Page Off - Indicates that the power supply unit is not functioning Indicates the power consumption is 7WIndicates the power consumption is 15.4W Normal - Indicates that the power supply unit is functioning System Power Threshold Displaying and Editing PoE System Information1. Click PoE PoE System Setting. The PoE System Setting Page opens Figure 7-2 PoE System Setting Page DEFINING ACCESS PROFILE LISTS From ACL Configuration WizardFigure 8-1 ACL Configuration Wizard Page Service Type UDP Source Port - Matches the packet to the UDP Source Port TCP Source Port - Matches the packet to the TCP Source PortTCP Destination Port - Matches the packet to the TCP Destination Port UDPAll - Specifies a UDP Packets filtering Adding ACL Profiles Defining Access Profile Lists1. Click ACL Access Profile List. The ACL Profile List Page opens Displays the access rule L2 ACL Figure 8-3 Add ACL Profile PageL3 ACL Figure 8-5 ACL Profile L2 ACL Tagged MAC Address Page Defining Level 2 ACLFigure 8-4 ACL Profile L2 ACL Tagged Page To define L2 MAC Address ACL profile Figure 8-6 ACL Profile L2 ACL Tagged VLAN Page Source MAC MaskDestination MAC Mask To define L2 802.1Q VLAN ACL profile Figure 8-7 ACL Profile L2 ACL Tagged Ether Type Page To define L2 Ether Type ACL profile Figure 8-8 ACL Profile L2 ACL Untagged Page Defining Level 3 ACLFigure 8-9 Add ACL Profile L3 Page Figure 8-11 ACL Profile L3 ACL ICMP IPv4 Address Page To define L3 IPv4 DSCP ACL profileFigure 8-10 ACL Profile L3 ACL ICMP IPv4 DSCP Page To define L3 IPv4 Address ACL profile ICMP Code To define L3 ICMP ACL profileFigure 8-12 ACL Profile L3 ACL ICMP Page ICMP Type Figure 8-13 ACL Profile L3 IGMP Page To define L3 IGMP ACL profileFigure 8-14 ACL Profile L3 IGMP Selected Page To define L3 TCP Port ACL profile Figure 8-15 ACL Profile L3 TCP PageFigure 8-16 ACL Profile L3 TCP Port Page Figure 8-17 ACL Profile L3 TCP Flag Page To define L3 TCP Flag ACL Profile Figure 8-18 ACL Profile L3 UDP Page If L3 ACL UDP is selected, the page updates as followsFigure 8-19 ACL Profile L3 UDP Port Page Description Filter Defining Access Rules ListsClick ACL Access Profile List The Access Profile List Page opens Figure 8-20 Access Profile List Page Source ID 1. Click . The Add Access Rule Page opensFigure 8-21 Add Access Rule Page IP based ACL Access ID 2. Define the Rule Detail fields 3. Click . The rule is changed, and the device is updated Profile ID list box Finding ACL Rules1. Click ACL ACL Finder The ACL Finder Page opens Figure 8-22 ACL Finder Page Ether Type Figure 8-23 Rule Detail PageSource MAC Destination MAC Notes about ‘IP’ and ‘MAC’ Based ACLs in the DGS-3100 Series Notes about ACLs capacity in the DGS-3100 Series Limited Lifetime Warranty for the product is defined as follows Reorient or relocate the receiving antenna Product Registration Warranty Period LIMITED WARRANTYProduct Type What Is Not Covered What You Must Do For Warranty Service is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed Trademarks FCC WarningCopyright Statement Tech Support for customers within Canada TECHNICAL SUPPORTTechnical Support Tech Support for customers within the United States D-Link UK & Ireland Technical Support over the Telephone For Customers within The United Kingdom & IrelandFor Customers within Canada D-Link UK & Ireland Technical Support over the Internet Technische Unterstützung Link Assistance techniqueSupport technique destiné aux clients établis en France Support technique destiné aux clients établis au Canada Asistencia Técnica de D-Link por teléfono Asistencia TécnicaAsistencia Técnica de D-Link a través de Internet Gli ultimi aggiornamenti e la documentazione sono Supporto tecnicoSupporto tecnico per i clienti residenti in Italia D-Link Mediterraneo S.r.L Tech Support for customers within Luxemburg Technical SupportTech Support for customers within the Netherlands Tech Support for customers within Belgium Pomoc techniczna D-Link poskytuje svým zákazníkům bezplatnou technickou podporu Technická podporaAktualizované verze software a uživatelských příruček najdete na webové stránce firmy D-Link D-Link Magyarország Technikai Támogatás Du kan finne programvare oppdateringer og bruker Teknisk SupportTeknisk Support D-Link Teknisk telefon Support Hverdager kl. 0800 D-Link teknisk support på InternettetD-Link teknisk support over telefonen Tlf. 7026 Arkisin klo. 9 - 21 numerosta Teknistä tukea asiakkaille SuomessaD-Link tarjoaa teknistä tukea asiakkailleen Tuotteen takuun voimassaoloajan Tekninen tuki palvelee seuraavasti D-Link tillhandahåller teknisk support till kunder i Sverige Teknisk Support för kunder i SverigePå vår hemsida kan du hitta mer information om mjukvaru uppdateringar och annan användarinformation Assistência Técnica Suporte TécnicoSuporte Técnico para clientes no Portugal Você pode encontrar atualizações de software e documentação de Τηλ 210 86 11 Φαξ 210 86 53 Δευτέρα-Παρασκευή Τεχνική ΥποστήριξηΓια πελάτες εντός του Ελλαδικού χώρου Τηλεφωνική υποστήριξη D-Link Indonesia, Malaysia, Singapore and Thailand Tech Support for customers inAustralia India e-mail amostafa@dlink-me.com Technical SupportTech Support for customers in http//support.dlink-me.com D-Link предоставляет бесплатную поддержку для клиентов Техническая поддержкаОбновления программного обеспечения и документация доступны на Интернет-сайте D-Link Asistencia Técnica São Paulo +11-2185-9301 Segunda à sexta Das 8h30 às 18h30 Suporte TécnicoSuporte Técnico para clientes no Brasil Telefone 0800-002-615 D-Link 友訊科技台灣分公司技術支援資訊電子郵件：dssqaservice@dlink.com.tw D-Link 免付費技術諮詢專線 diperoleh pada situs web D-Link Dukungan TeknisDukungan Teknis untuk pelanggan Update perangkat lunak dan dokumentasi pengguna dapat 技术支持中心电话：8008296688 技术支持中心传真：02885176948 技术支持您可以在 D-Link 的官方網站找到產品的軟件升級和使用手冊办公地址：北京市东城区北三环东路 36 号环球贸易中心 B 座 26F 02-05 室邮编 International Offices Product Serial No Product installed in type of computerRegistration Card All Countries and Regions Excluding USA Product Model