D-Link DI-3660 manual Before you Begin, Unpacking the Router, Safety Warnings & Recommendations

DI-3660 Router

Router Installation

Before you Begin

Warning: Only trained & qualified technician is allowed to install & maintain the equipment

This Chapter instructs you on how to install the D-Link DI-3660 Series Router.

The Chapter is divided into following sections:-

∙Unpacking the Router.

∙Safety Warnings and Recommendations.

∙Tools and equipments required for installation.

∙Installing the Router Case.

∙Connecting Power to the Router.

∙Connecting to the Console & Auxiliary Port of the Router.

∙Connecting Network Modules.

Unpacking the Router

Before you proceed further, please check all items you received with your DI-3660 Router with this list to make sure the package is complete. The complete package should include:

∙One DI-3660 Router.

∙One 100~240V AC power cord.

∙One Console Cable (DRC-0001) for console connection.

∙Rack mount kit including six screws and two mounting brackets.

∙Installation Guide.

If any item is found missing or damaged, please contact your local D-Link Reseller.

Safety Warnings & Recommendations

Follow these guidelines to ensure general safety:

1.Keep the environment clear, dry, safe and dust-free during and after installation.

2.Avoid pulling power supply cable and interface cable vigorously.

3.Ensure that the mains AC power is conditioned using a Standard Power Surge suppressor.

4.It is recommended to use a UPS for continuous uninterrupted power.

5.Wear safety glasses when working under any conditions that might be hazardous to your eyes.

6.Do not touch the uncovered telephone-network cable directly.

7.Do not insert telephone-network cable connector to the Ethernet/Fast Ethernet port.

8.Do not work on the system or connect or disconnect cables during periods of lightning activity.

9.Console, Auxiliary & Ethernet connection is RJ-45 based, therefore before plugging corresponding cable it is important that you properly check the cable type.

10.ISDN and Ethernet Cables are very similar to each other .It is important that you use the correct cable for each connection else, your router could get damaged.

Tools and equipments required for installation

Following are the tools required for router installation:-

1.Screwdriver

2.ESD-preventive wrist strap

3.Appropriate connecting cable (the cable required for each card)

4.Console cable

5.Power supply cable

6.Terminal

__________________________________________________________________________________________________________________

13