D-Link DI-3660 manual Dtr, AUX Port- Auxiliary Port

DI-3660 Router

The pin of the Console port is defined in the following table:

Sr. No.	Name	Description
1	CD	Carrier Detect
2	RXD	Receive
3	DSR	Data Send Ready
4	TXD	Transmit
5	RTS	Request to Send
7	DTR	Data Ready
8	SG	Signal Ground

The DRC-0001 cable is used to connect the Console port of D-Link DI-3660 Router with the external Console terminal equipment or serial port of PC. One end of the DRC-0001 cable is a standard RJ45 eight-pin connector & the other end is DB25 and DB9 connector. The RJ45 connector gets connected to the Console port of D-Link DI-3660 series router, the other end you can choose one from the DB25 or DB9 port according to your serial port on terminal or PC. The pin connection of the console cable DRC-0001 is showed in the following figure.

AUX Port— Auxiliary Port

The Transmission rate supported by AUX Port is 1200bps -to-115200bps and it has a standard RJ45 Connector, Parity Check is optional, and has Flow Control. AUX Port can be directly connected to an asynchronous modem for remote console configuration support or as a backup link. The communication parameter of the AUX port can be set as: Rate— 115200bps, eight-bit data bits, one-bit stop bit, no Parity Check, no hardware Flow Control.

The auxiliary cable, DRC-0011 is used to connect the AUX Port with an external asynchronous modem. One end of the DRC-0011 cable is a standard RJ45 eight pin connector and the other end is DB25 and DB9 female connector. The RJ45 connector gets connected to the AUX Port of the router and on the other end you choose one from DB25 or DB9 according to the requirement of asynchronous serial port of Modem. The pin connection of the AUX cable DRC-0011 is showed in the following figure.

__________________________________________________________________________________________________________________

16