D-Link DI-524UP manual Choose this option if your ISP uses PPPoE. Most DSL users

PPPoE	Choose this option if your ISP uses PPPoE. (Most DSL users
	will select this option.)
	Dynamic PPPoE Choose this option to receive an IP Address
	automatically from your ISP.
	Static PPPoE Choose this option to you have an assigned
	(static) IP Address.
Password	Enter The PPPoE user name provided to you by your ISP.
Retype Password	Retype the password entered in the previous field.
Service Name	Enter the Service Name provided by your ISP (optional).
IP Address	This option is only available for Static PPPoE. Enter the static
	IP address for the PPPoE connection.
MAC Address	The default MAC Address is set to the WAN’s physical interface
	MAC address on the Broadband Router. It is not recommended
	that you change the default MAC address unless required by
	your ISP.
Clone MAC Address	The default MAC address is set to the WAN’s physical interface
	MAC address on the Broadband Router. You can use the Clone
	MAC Address button to copy the MAC address of the Ethernet
	Card installed by your ISP and replace the WAN MAC address
	with the MAC address of the router. It is not recommended that
	you change the default MAC address unless required by your
	ISP.
Primary
DNS Address	Input the primary DNS (Domain Name Server) IP address
	provided by your ISP
Secondary
DNS Address	This is an optional DNS Address entry to be used if the primary
	DNS fails.
Maximum Idle Time	The amount of time of inactivity before the device will
	disconnect time your PPPoE session. Enter a Maximum Idle
	Time (in minutes) to define a maximum period of time for which
	the Internet connection is maintained during inactivity. If the
	connection is inactive for longer than the defined Maximum Idle
	Time, then the connect ion will be dropped. Either set the value
	for idle time to zero or enable Auto-reconnect to disable this
	feature.

19