D-Link DI-524UP manual Enter the user name as provided to you by your ISP

User Name	Enter the user name as provided to you by your ISP.
Password	Enter The PPPoE user name provided to you by your ISP.
Retype Password	Retype the password entered in the previous field.
Auth Server	Enter the name of the Authentication Server as provided to you
	by your ISP. This is the computer that will accept your user
	name and password to be authenticated on the network.
Auto Reconnect	Checking the Enabled radio button will allow the router to
	reconnect to the network automatically if it becomes
	disconnected.
MAC Address	The default MAC Address is set to the WAN’s physical interface
	MAC address on the Broadband Router. It is not recommended
	that you change the default MAC address unless required by
	your ISP.
Clone MAC Address	The default MAC address is set to the WAN’s physical interface
	MAC address on the Broadband Router. You can use the
	Clone MAC Address button to copy the MAC address of the
	Ethernet Card installed by your ISP and replace the WAN MAC
	address with the MAC address of the router. It is not
	recommended that you change the default MAC address unless
	required by your ISP.
MTU	Enter an MTU value only if required by your ISP. Otherwise,
	leave it at the default setting.

23