D-Link DI-524UP manual LAN requesting it, first. Other devices will have a lower priority

	LAN requesting it, first. Other devices will have a lower priority
	in sending information through the router.
Name	Enter a user-defined name to define this application for users
	on the LAN.
Protocol	Choose the protocol to be enabled for QoS from the pull-down
	menu. The user may choose TCP, UDP or Both.
Port Range	Enter a virtual port range that will use this application.
	Remember these are virtual ports and not physical ports on the
	router.
Bandwidth	Use the pull-down menu to select the best bandwidth for the
	QoS setting on this router. The user may set a bandwidth
	between 1Kbps to 32Mbps. Choosing Best Effort will set the
	router to allow the first user to access the set application to
	have the total bandwidth needed for the file being transferred.
	Choosing Full will denote that the router will allot 100Mbps of
	bandwidth for the specified QoS implementation. Only one QoS
	implementation can be set at Full.

Click Apply to set the QoS for IP.

48