D-Link DI-604 manual Using the Configuration Wizard, Type admin in the User Name field lower case

Using the Configuration Wizard

The DI-604 provides Web based configuration. You can configure your DI-604 through your Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh or UNIX based platforms.

Activate your browser. Then type the IP address of the DI-604 into the Location (for Netscape) or Address (for IE) field and press “Enter.” For example: http://192.168.0.1.

• Open the web browser

• Type in the IP Address of the DI-604

http://192.168.0.1

(The IP Address shown in the example above is the default setting. If you have changed the IP Address of the DI-604 to conform to a network, then input that IP Address in the web browser, instead of the default IP Address shown.)

•Type admin in the User Name field (lower case)

•Leave the Password blank

•Click OK

admin

This screen will appear. Click Run Wizard.

The Setup Wizard screen will appear. Follow the Wizard step by step to quickly configure the DI-604.

Click Next