DI-634M User’s Manual

Using the Configuration Menu

 

 

Super G without Turbo:

Super G with Dynamic Turbo:

Super G with Static Turbo:

SSID Broadcast:

Authentication:

WEP:

WEP Encryption:

Key Type:

Keys 1-4:

Capable of Packet Bursting, FastFrames, Compression, and no Turbo mode.

Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all nodes on the wireless network is Super G with Dynamic Turbo enabled.

Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards compatible with non-Turbo (legacy) devices. Static turbo mode is always on and is only enabled when all nodes on the wireless network is Super G with Static Turbo enabled.

Choose Enabled to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identifier) to establish communication. Choose Disabled if you do not wish to broadcast the SSID over the network.

Select Open System or WPA-PSKauthentication.

Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area Networks (WLAN). WEP provides security by encrypting the data that is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-634M make sure to also enable encryption on all the wireless clients or wireless connection will not be established.)

Select the level of encryption desired: 64-bit, or 128-bit.

Select HEX or ASCII.

Input up to 4 WEP keys; select the one you wish to use.

D-Link Systems, Inc.

15

Page 15
Image 15
D-Link DI-634M manual Ssid Broadcast Authentication, WEP Encryption Key Type Keys