D-Link DI-634M manual Mtu, Dial on Demand Auto-reconnect

DI-634M User’s Manual Using the Configuration Menu

PPPoE:

User Name:

Retype Password:

Service Name:

IP Address:

Network Mask:

Maximum Idle Time:

MTU:

Dial on Demand:

Auto-reconnect:

Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.)

Dynamic PPPoE: Receive an IP Address automatically from your ISP.

Static PPPoE: You have an assigned (static) IP Address.

Your PPPoE username provided by your ISP.

Re-enter the PPPoE password.

Enter the Service Name provided by your ISP (optional).

This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

The network mask of the PPPoE interface

Either set the value for idle time to zero or enable Auto- reconnect to disable this feature.

Maximum Transmission Unit-1492 is the default setting-you may need to change the MTU for optimal performance with your specific ISP.

If Enabled, the DI-634M will connect to your ISP after you open an internet browser and establish a connection to traffic.

If Enabled, the DI-634M will automatically connect to your ISP after your system is restarted or if the PPPoE connection is dropped.

D-Link Systems, Inc. 20