Type The type of routing protocol used | D-Link DI-714 instruction

addresses there are and where the router should forward packets when it receives them.

Type: The type of routing protocol used.

Destination LAN IP Address: Shows the Destination IP Address on the LAN side.

Subnet Mask: Shows the subnet mask assigned to the Destination LAN IP Address.

Gateway IP Address: The IP Address of the assigned Gateway.

Hop Count: The number of hops between the Destination LAN IP Address and the Gateway IP Address.

36

Image 36

D-Link DI-714 user manual Type The type of routing protocol used, Gateway IP Address The IP Address of the assigned Gateway

Contents

Wireless Broadband Router User’s Manual D-LinkDI-714 Hardware Installation Basic DI-714 Configuration & Main PageContents Advanced Settings TroubleshootingTechnical Specifications Limited Warranty Registration Introduction Package Contents Introduction to Broadband Router Technology Introduction to Firewalls Introduction to Local Area Networking Introduction to Virtual Private Networking Point-to-Point Tunneling Protocol PPTP Introduction to Wireless Networking IP Security IPSecStandards Based Technology Installation Considerations Hardware Installation PlacementSafety Precautions device will violate the products warranty POWER RESETFront Panel Rear Panel Basic DI-714 Configuration & Main Page Start-up and Log inPage Setup Wizard Main Page Time Settings Device IP Settings Device IP AddressDevice IP Subnet Mask Cable/DSL ISP Settings Enter the IP address that is assigned by your ISPEnter the IP subnet mask Enter the ISP gateway address Enter the DNS IP address ISP Additional Settings Password Enter the password of your ISP accountUser name Enter the user name of your ISP account Host Name Enter the host name provided by the ISP MAC Address Enter the MAC address of the Ethernet adapter Modem Settings Device Information Device Status This means that there is a connectionThis means that there is not a connection Basic Setup Page Advanced Settings DHCP Server Settings Virtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings System Tools Intruder Detection LogIntruder Detection Log View detection logs Display Routing Table Type The type of routing protocol used Gateway IP Address The IP Address of the assigned Gateway System Diagnostics Load Default Settings Upgrade Firmware Reset Device Troubleshooting Basic FunctionsMy Broadband Router will not turn on. No LED’s light up Make sure that the power switch is set to “On” The Link or Act LED’s do not turn on Sometimes my Broadband Router stops working or locks up LAN Connection Problems I can’t access my Broadband Router I can’t connect to other computers on my LAN ISP Connection Problems I can access the Broadband Router, but I can’t connect to my ISP Internet Application Problems My online game does not work Wireless Troubleshooting Can’t access the Broadband Router from a wireless network cardMy E-Mail program doesn’t receive my E-Mail Performing a Factory Reset 3. Click on Load Default Settings Using the PING Utility in Windows 95/98/Me PING, your connection is not complete The screen shown below is an example of an unsuccessful PING C\pingPinging 192.168.0.1 with 32 bytes of data Request timed out Request timed out Request timed out Request timed out Using the WINIPCFG Utility in Windows 95/98/Me D-Link DFE-530TX PCI Fast Eth Click on More Info to display additional IP information Technical Specifications StandardsProtocols Supported Management Technical Support Tech Support for customers within the United StatesTech Support for customers within Canada D-Link Technical Support over the Telephone 877 Hardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna