The Link or Act LED’s do not turn on | D-Link DI-714 specification

LED’s don’t follow the correct boot-up sequence as stated in the Quick Install Guide.

Cause:

The unit’s firmware is corrupt.

The unit is not receiving the correct voltage from the power supply. Resolution:

Download and upgrade the latest firmware.

Make sure the correct firmware has been used while upgrading. Use only the firmware provided on D-Link’s web or FTP sites.

Use only the power adapter provided.

The Link or Act LED’s do not turn on.

Cause:

The network cable is not connected.

The network cable is connected but not the right type, whether it is patch or straight-through.

Resolution:

Make sure that both ends of the cable are connected. Try using another cable.

If you are using a straight-through cable, try a patch cable and vice-versa.

Sometimes my Broadband Router stops working or locks up.

Cause:

Someone has attempted to hack into someone on your LAN.

The Broadband Router has detected harmful data trying to access your LAN.

42

Image 42

D-Link DI-714 user manual The Link or Act LED’s do not turn on, Sometimes my Broadband Router stops working or locks up

Contents

Wireless Broadband Router User’s Manual D-LinkDI-714 Hardware Installation Basic DI-714 Configuration & Main PageContents Technical Specifications Advanced SettingsTroubleshooting Limited Warranty Registration Introduction Package Contents Introduction to Broadband Router Technology Introduction to Firewalls Introduction to Local Area Networking Introduction to Virtual Private Networking Point-to-Point Tunneling Protocol PPTP Introduction to Wireless Networking IP Security IPSecStandards Based Technology Installation Considerations Safety Precautions Hardware InstallationPlacement device will violate the products warranty Front Panel POWERRESET Rear Panel Basic DI-714 Configuration & Main Page Start-up and Log inPage Setup Wizard Main Page Time Settings Device IP Settings Device IP AddressDevice IP Subnet Mask Enter the IP subnet mask Enter the ISP gateway address Cable/DSL ISP SettingsEnter the IP address that is assigned by your ISP Enter the DNS IP address ISP Additional Settings Password Enter the password of your ISP accountUser name Enter the user name of your ISP account Host Name Enter the host name provided by the ISP MAC Address Enter the MAC address of the Ethernet adapter Modem Settings Device Information Device Status This means that there is a connectionThis means that there is not a connection Basic Setup Page Advanced Settings DHCP Server Settings Virtual Server Settings Page Static Routing Dynamic Settings Modem String Settings Password Settings System Tools Intruder Detection LogIntruder Detection Log View detection logs Display Routing Table Type The type of routing protocol used Gateway IP Address The IP Address of the assigned Gateway System Diagnostics Load Default Settings Upgrade Firmware Reset Device My Broadband Router will not turn on. No LED’s light up TroubleshootingBasic Functions Make sure that the power switch is set to “On” The Link or Act LED’s do not turn on Sometimes my Broadband Router stops working or locks up LAN Connection Problems I can’t access my Broadband Router I can’t connect to other computers on my LAN ISP Connection Problems I can access the Broadband Router, but I can’t connect to my ISP Internet Application Problems My online game does not work Wireless Troubleshooting Can’t access the Broadband Router from a wireless network cardMy E-Mail program doesn’t receive my E-Mail Performing a Factory Reset 3. Click on Load Default Settings Using the PING Utility in Windows 95/98/Me Pinging 192.168.0.1 with 32 bytes of data Request timed out PING, your connection is not completeThe screen shown below is an example of an unsuccessful PING C\ping Request timed out Request timed out Request timed out Using the WINIPCFG Utility in Windows 95/98/Me D-Link DFE-530TX PCI Fast Eth Click on More Info to display additional IP information Protocols Supported Technical SpecificationsStandards Management Tech Support for customers within Canada Technical SupportTech Support for customers within the United States D-Link Technical Support over the Telephone 877 Hardware excluding power supplies and fans One 1 year Page Reorient or relocate the receiving antenna