D-Link DIR-615 manual Administrator Settings

Section 3 - Configuration

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords.

Admin Password: Enter a new password for the Administrator Login Name. The administrator can make changes to the settings.

User Password: Enter the new password for the User login. If you login as the User, you can only see the settings, but cannot change them.

Gateway Name: Enter a name for the DIR-615 router.

Remote Remote management allows the DIR-615 to be Management: configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator

tasks from the remote (Internet) host.

Remote Admin		The port number used to access the DIR-615.
	Port: Example: http://x.x.x.x:8080 whereas x.x.x.x
		is the Internet	IP address of the DIR-615 and
		8080 is the port used for the Web Management
		interface.
Inbound Filter: This section will list any rules that are created.
		You may click the Edit icon to change the
		settings or enable/disable the rule, or click the
		Delete icon to remove the rule.
	D-Link DIR-615 User Manual		62