Section 3 - Configuration
Enable Autoconfiguration: | Check to enable the Autoconfiguration feature. |
Autoconfiguration Type: | Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless. |
IPv6 Address Range Start: | Enter the start IPv6 Address for the DHCPv6 range for your local computers. |
IPv6 Address Range End: | Enter the end IPv6 Address for the DHCPv6 range for your local computers. |
IPv6 Address Lifetime: | Enter the IPv6 Address Lifetime (in minutes). |
55 |
