Section 3 - Configuration
Inbound Filters
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features.
Name: Enter a name for the inbound filter rule.
Action: Select Allow or Deny.
Enable: Check to enable rule.
Source IP Start: Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range.
Source IP End: Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range.
Save: Click the Save button to apply your settings. You must click Save Settings at the top to save the settings.
Inbound Filter This section will list any rules that are created. Rules List: You may click the Edit icon to change the settings or enable/disable the rule, or click the
Delete icon to remove the rule.
42 |
