Section 3 - Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classified automatically.
Enable QoS Engine:
Automatic Uplink Speed:
Measured Uplink Speed:
Manual Uplink Speed:
QoS Engine Rules:
Name:
Priority:
Protocol:
Local IP Range:
Local Port Range: Remote IP Range:
Remote Port Range:
This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP.
This option is enabled by default when the QoS Engine option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection.
This displays the detected uplink speed.
The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP’s often speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as speedtest.net.
A QoS Engine Rule identifies a specific message flow and assigns a priority to that flow. For most applications, automatic classification will be adequate, and specific QoS Engine Rules will not be required.
The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match the rule with the highest priority will be used.
Create a name for the rule that is meaningful to you.
The priority of the message flow is entered here
The protocol used by the messages.
The rule applies to a flow of messages whose
The rule applies to a flow of messages whose
The rule applies to a flow of messages whose
The rule applies to a flow of messages whose
74 |
