D-Link DSL-502T manual Installing the USB Driver

DSL-502T DSL Router User’s Guide

Installing the USB Driver

The CD-ROM shipped with the Router contains the USB driver software.

1.Insert the DSL-502T Installation CD-ROM into the CD-ROM drive.

2.Connect the USB cable to the device. Within a few seconds you should see the “Found New Hardware” message window, followed shortly after by the opening “Found New Hardware Wizard” window:

3.If you do not see the auto-run window pictured above, explore the CD and double-click the inf file DLink_502t.inf.

4.Click the Next button.

xiii