DSL-502T ADSL Router User’s Guide

Standards Compatibility and Compliance

The DSL-502T complies with or is compatible with the following standards as recognized by their respective agencies.

ITU G.992.2 (G.lite “Splitterless ADSL”) compliant

ITU-T Rec. I.361 compliant

RFC 791 Internet Protocol compliant

RFC 792 UDP compliant

RFC 826 Address Resolution Protocol compliant (ARP) compliant

RFC 1058 Routing Information Protocol (RIP) compliant

RFC 1213 MIB II for IP compliant

RFC 1334 PPP Authentication Protocol compliant

RFC 1389 Routing Information Protocol 2 (RIP2) compliant

RFC 1483 IP over AAL5/ Bridged Ethernet over AAL5 compliant

RFC 1557 Classical IP over ATM (IPoA) compliant

RFC 1661 Point to Point Protocol (PPP) compliant

RFC 1877 Automatic IP assignment compliant

RFC 1994 Challenge Handshake Authentication Protocol compliant

Supports RFC 2131 and RFC 2132 DHCP functions including: automatic assignment of IP address, use of subnet mask and default gateway and provision of DNS server address for all hosts

RFC 2364 PPP over ATM compliant (PPPoA) compliant

RFC 2516 PPP over Ethernet compliant (PPPoE) compliant

RFC 2684 Bridged/Routed Ethernet over ATM compliant

IEEE 802.3 compliant

IEEE 802.3u compliant

IEEE 802.1d compliant

IEEE 802.3x compliant

Embedded web server support

Supports Dynamic Learning

Supports Static Routing

Supports NAPT for up to 4096 connections

Supports DHCP for up to 253 hot connections

Supports IGMP

Supports ATM Forum UNI 3.1/4.0

Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions

Supports TELNET and TFTP

Supports back pressure for half-duplex

3

Page 19
Image 19
D-Link DSL-502T manual Standards Compatibility and Compliance