D-Link DSM-320RD Checking the bit and sample rates of a music file., I created a playlist on my computer, but it doesnt appear on my media player., How do I reset my DSM-320RD?, What version of firmware do I have?

103
Troubleshooting (continued)
To check the bit and sample
rates of a music file:
1. Right-click on the file and
select Properties.
2. Select the Summary tab and
click the Advanced button.
Scroll to the bottom of the list.
The file to the right has a bit
rate of 128 kbps and a sample
rate of 44 kHz.
In most cases, the sample
rate does not matter unless
you come across a file that will
not play or appear on your
player. Use the above
procedure to check the file
settings for supported rates.
Checking the bit and sample rates of a music file.
I created a playlist on my computer, but it doesn’t
appear on my media player.
Make sure the playlist file is located in a folder shared by your media
player. Copy the playlist to your shared music folder or click on the
Media Server icon to add or change your folder options.
How do I reset my DSM-320RD?
Under normal circumstances, you should not need to reset your media
player. However, to fully reset the media player, lightly insert a paper
clip into the reset opening on the unit’s rear panel for ten seconds.
What version of firmware do I have?
From the main home screen, press the SETUP button and select
Version. The firmware version will be listed.