96
Version
Automatically check for firmware
update: Firmware updates are
system software updates that
correct known issues and add new
features to your DSM-320RD. If
Yes is selected, your DSM-320RD
will check the Internet periodically
to locate available firmware
updates. If a firmware update is
located, you will be prompted to
update.
Check for Updates: Press ENTER on the remote control when this option is
highlighted to check for firmware updates immediately. If a firmware update is
located, you will be prompted to update. IMPORTANT: DO NOT TURN OFF
THE UNIT OR DISCONNECT THE POWER DURING THE FIRMWARE
UPDATE. Once the update has been completed the DSM-320RD will restart.
Some firmware updates may display an informational message telling
you to upgrade your version of the D-Link Media Server software. Your
current version of the software should still work, but to utilize all of the
latest firmware features you should upgrade your Media Server software.
Please visit http://support.dlink.com for the latest version of the Media
Server software.
Note: If you have a version of the D-Link Media Server already installed
on your system, please uninstall the software and restart your system
before installing a newer version of the D-Link Media Server software.
Setup (continued)