40
Your current wireless settings
are displayed based on the
SSID you selected in the
previous step. If you chose the
enter the SSID manually, then
the default settings are entered.
Current Wireless Settings

SSID

The SSID name selected on the
previous screen appears here.
You can change the SSID you
selected or enter one manually
by pressing the ENTER button
on the remote control with this field highlighted. The on-screen keyboard will
be displayed and you can enter the SSID.

Mode

There are two different modes to select from: Ad-Hoc and Infrastructure Mode.
Ad-Hoc Mode is used for peer to peer wireless networks that do not contain a
router or an access point. Infrastructure Mode is used for networks with an
access point or router. To toggle between the two, press the ENTER button
when Mode is highlighted. The up arrow and down arrow will toggle between
the two options. Press ENTER again to select.

Encryption

WEP (Wired Equivalent Privacy) & WPA (WiFi Protected Access; a wireless
standard designed to improve upon the security features of WEP), are two
encryption technologies used by wireless devices. There are six options
configurable under this setting; Disable, 64bits-Hex, 128bits-Hex, 64bits-
ASCII, 128bits-ASCII, and WPA-PSK-TKIP.
To toggle between the options, press the ENTER button when Encrypt is
highlighted. The up arrow and down arrow will toggle between the six options.
Press ENTER again to select.

Key Index

Select a number between 1 and 4. To toggle between the options, press the
ENTER button when Key Index is highlighted. The up arrow and down arrow
will toggle between the four options. Press ENTER again to select.

Key

To connect to an encrypted wireless device, the key you enter here must match
the key of the device exactly.
The DSM-320RD Setup Wizard (continued)
To use Windows® Connect Now
(WCN), please skip to page 43.