43
Using the AP Manager (continued)
• DHCP Server: Enable or disable the DHCP server function.
Device Configuration>DHCP • IP Assigned From:
Enter the initial IP address to be assigned by the DHCP server.
• Range of Pool (1~255): Enter the number of allocated IP addresses.
• SubMask: Enter the subnet mask.
• Gateway: Enter the gateway IP address, typically a router.
• Wins:
Wins (Windows Internet Naming Service) is a system that determines the IP
address of a network computer with a dynamically assigned IP address, if applicable.
• DNS: The IP address of the DNS server, if applicable.
• Domain Name: Enter the domain name of the DWL-7100AP, if applicable.
• Lease Time:
The period of time that the client will retain the assigned IP address
.
• Status: This option turns the dynamic pool settings on or off.
• Dynamic Pool Settings: Click to enable Dynamic Pool Settings. Configure the IP
address pool in the fields below.
• Static Pool Settings: Click to enable Static Pool Settings. Use this function to assign
the same IP address to a device at every restart. The IP addresses assigned in the
Static Pool list must NOT be in the same IP range as the Dynamic Pool.