Using the AP Manager (continued)
Device Configuration>Filters
•Internal Station Connect Cross 11a, 11g: Enabling this allows wireless IEEE802.11a and IEEE802.11g clients to communicate with each other. When this option is disabled, IEEE802.11a and IEEE802.11g wireless stations are not allowed to exchange data through the access point.
The following features are configurable in IEEE802.11a & IEEE802.11g:
•Internal Station Connection: Enabling this allows wireless clients to communicate with each other. When this option is disabled, wireless stations are not allowed to exchange data through the access point.
•Broadcast from Ethernet to WLAN: Enabling this option allows Ethernet devices to communicate with wireless clients. When this option is disabled, all data from Ethernet to wireless clients is blocked. Wireless devices can still send data to the Ethernet devices when this is disabled.
•Access Control: When disabled access control is not filtered based on the MAC address. If Accept or Reject is selected, then a box appears for entering MAC addresses. When Accept is selected, only devices with a MAC address in the list are granted access. When Reject is selected, devices in the list of MAC addresses are not granted access.
•ACL MAC Address: To add to the Access Control List (ACL), enter the MAC address and click Add. To delete a MAC address, highlight it and press Del.
41
