D-Link DWL-7100AP manual Device ConfigurationAP Mode

Using the AP Manager (continued)

Device Configuration>AP Mode

The following featuresare configurable in IEEE802.11a & IEEE802.11g:

•Access Point: The default setting used to create a wireless LAN.

•PtP Bridge: Allows you to connect two wireless LANs together. This only works with another DWL-7100AP. If enabled you must enter the MAC address of the other DWL-7100AP.

•PtMP Bridge: Allows you to connect mulitple wireless LANs together. All other LANs must be using DWL-7100APs. When enabled, you must enter the MAC address of the other DWL-7100APs. Enter up to eight addresses.

•AP Repeater: Allows you to repeat the wireless signal of the root access point. When enabled you must enter the MAC address of the root access point.

•AP Client: Allows any device with an Ethernet connection to connect to the wireless network via another DWL-7100AP, such as a printer, gaming console (Xbox, PS2), or a computer.You will need to enter the SSID of the DWL-7100AP that is functioning

as an AP.

42