Using the Configuration Utility (continued)
Advanced
Frequency:
Select 802.11b/g for compatibility with both 802.11b or 802.11g networks, or select 802.11b only.
Super G:
Selecting Super G mode enables a maximum wireless signal rate of up to 108Mbps.*
Starting Ad Hoc Network:
When using Ad Hoc mode, select the frequency here.
Ad Hoc Channel:
Select the Ad Hoc channel when in Ad Hoc mode. When communicating in Ad Hoc mode, all devices must share the same channel.
Profile IP Settings:
You can Enable or Disable the IP Settings portion of your profile here. If you select Disable you will need to configure the IP address information each time you connect to a network. If you select Enable you will maintain the same IP address information each time you connect to a network.
Power Mode:
Disable
Enable - This setting consumes the least power.
Launch Utility on Startup:
Select Enable or Disable.
Click Apply if you have made any changes.
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.
19
