Setting up a Wireless Ad-Hoc Network | D-Link DWL-G132 instruction

Getting Started (continued)

Setting up a Wireless Ad-Hoc Network

DWL-G132

Wireless G USB 2.0 Adapter

Install the D-LinkAirPlus Xtreme GTM DWL-G132Wireless USB 2.0 adapter into the desktop computer. (See the Quick Installation Guide included with the product.)

Install the D-LinkAirPlus Xtreme GTM DWL-G132Wireless USB 2.0 adapter into the laptop computer. (See the Quick Installation Guide included with the product.)

Set the wireless configuration for the adapters to Ad-Hoc mode, set the adapters to the same channel, and assign an IP address to each computer on the Ad-Hoc network.

IP Address

When assigning IP addresses to the computers on the network, please remember that the IP address for each computer must be in the same IP address range as all the computers in the network, and the subnet mask must be exactly the same for all the computers in the network.

For example: If the first computer is assigned an IP address of 192.168.0.2 with a subnet mask of 255.255.255.0, then the second computer can be assigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc.

IMPORTANT: If computers or other devices are assigned the same IP address, one or more of the devices may not be visible on the network.

11

Image 11

D-Link DWL-G132 manual Setting up a Wireless Ad-Hoc Network

Contents

Link AirPlus Xtreme GTM DWL-G132 Contents Package Contents Introduction Introduction Fully 802.11b/802.11g compatible Features and Benefits People use Wlan technology for many different purposes Wireless Basics Installation Considerations Wireless Basics Getting Started DWL-G132 Getting Started Setting up a Wireless Ad-Hoc Network View Available Wireless Networks UsingtheConfigurationUtility Status Using the Configuration UtilityWireless Mode Link Info Tx Rate Signal QualityEncryption Connection Info Data Encryption ConfigurationSelect Enabled or Disabled IP Settings Proxy Settings HTTP, Secure, FTP, Gopher Socks Use the same proxy server for all protocols Advanced RTS Threshold Fragmentation Threshold Site Survey Site Survey Add Advanced Configuration, Add or PropertiesConfiguration or Properties you can Click Authentication Config Authentication WPAConfigure Authentication WPA Advanced Security Settings Authentication WPA -PSK Authentication WPA Advanced Security Settings Add Authentication WPA-PSK About Advanced Security Settings Networking Basics Using the Network Setup Wizard in Windows XP Networking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Computer Description if you wish this field is optional Right-click on My Computer Select Properties Local Area Connection icon in the task bar Checking the IP Address in Windows XP Control Panel Assigning a Static IP Address in Windows XP/2000 Networking Basics Protocol TCP/IP Click Properties Checking the Wireless Connection by Pinging in Windows XP Hardware Tab Click Device Manager Go to Start My Computer Properties Link AirPlus G DWL-G132 Wireless USB Adapter Troubleshooting Why can’t I get a wireless connection? Why does my wireless connection keep dropping? Bus Type TemperatureMedia Access Control Standard Technical Specifications Technical Support Warranty and Registration Page Important Note