D-Link DWL-G132 manual Encryption, Connection Info, Tx Rate, Channel, Signal Quality, Packet Count

Using the Configuration Utility (continued)

Encryption:

You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.

Connection Info:

When the DWL-G132 is connected to a wireless network, Connected will be displayed in this field.

Tx Rate:

The default setting is Auto; Tx Rate settings are automatically determined for a maximum wireless signal rate of up to 54Mbps (108Mbps* in Turbo mode).

Channel:

The default setting is Auto. The channel selection is automatically determined by the DWL-G132.

Signal Quality:

Displays the signal strength and the link quality of the DWL-G132’s wireless connection to the access point or router.

Packet Count:

Displays the statistics of the data packets that are transmitted and received.

Rescan Button:

Rescans for the strongest signal with the current SSID and associates with that access point or router.

*Maximum wireless signal rate derived from 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate.

14