Section 3 - Configuration
Wireless Settings
Wireless Network Service Set Identifier (SSID) is the name Name: of your wireless network. Create a name using up to 32 characters. The SSID is case-
sensitive, and set to dlink by default.
Operation Select Access Point mode,WDS mode,WDS
Mode : with AP mode,AP Repeater mode or AP
Client mode.
Wireless Indicates the channel setting for the DAP- Channel: 1353. The Channel can be changed to fit the channel setting for an existing wireless network
or to customize the wireless network.
Enable Auto E n a b l e d b y d e f a u l t , a l l o w s t h e Chanel Scan:
amount of interference.
802.11Mode: Select the appropriate 802.11 mode based on the wireless clients in your network. The
Only, Mixed 802.11b/g, 802.11b Only, 802.11n Only, or Mixed 802.11b/g/n.
Channel Width: Select the appropriate channel width between 20MHz or Auto 20/40MHz from the
Transmission Select the transmission rate. It is strongly suggested to use the Best setting for optimal performance.
Rate:
SSID Broadcast: Select Disable if you do not want the SSID to be broadcast by the
Wireless Select a wireless security setting. Options are None, WEP, WPA, WPA2 or
19 |