D-Link DAP-1353 manual Configure WPA Enterprise, Next to Personal / Enterprise, select Enterprise

Section 4 - Security

Configure WPA (Enterprise)

It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.

1.Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Wireless Settings

on the left side.

2.Next to Security Mode, select Enable

WPA Wireless Security , Enable

WPA2 Wireless Security, or Enable

WPA2-Auto Wireless Security.

3.Next to Cipher Mode, select TKIP, AES, or Auto.

4.Next to Personal / Enterprise, select Enterprise.

5.Next to RADIUS Server enter the IP Address of your RADIUS server.

6.Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port.

7.Next to Shared Secret, enter the security key.

8.Click Apply Settings to save your settings.

D-Link DAP-1353 User Manual 48