RANGE MODEL: ER30G
Backguard Kits | INSTALLATION |
AERB30G03, AERB30G06, AERB30G09 | INSTRUCTIONS |
DANGER: Electric shock and explosion hazard! Before installation, disconnect the power cord and shut off the gas supply valve.
Backguard height varies with kit
Instructions: |
|
|
|
|
STEP 1: | Disconnect the power cord to the range. Turn off the gas at the gas supply | |||
| valve. | |||
STEP 2: | Slide the range out from the cabinet. | |||
STEP 3: | Remove the grates. | |||
WARNING: Do not disassemble the range until it has cooled. | ||||
STEP 4: | Remove and retain the three (3) screws on the front of the existing backguard. | |||
STEP 5: | Remove the two (2) top screws on the back of the side panels. | |||
STEP 6: | Remove the existing backguard. |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
Continued on back...
Backguard Removal
Part No. 106191 Rev. B