Screw,
2 Places
STEP 7: Remove the protective plastic cover
from the new backguard.
STEP 8: Place the new backguard over the back of the range. The backguard fits over the exhaust duct sticking up on the back of the unit. Be sure to slide the tabs on the back of the backguard in- side the flanges on the back of the unit.
STEP 9: Fasten the backguard in place with the three (3) existing chrome plated screws.
STEP 10: Tighten the two (2) top screws on the back of the side panels.
STEP 11: Reinstall the grates.
STEP 12: Turn on the gas at the gas supply valve. Connect the power cord to the electrical outlet.
Backguard
Exhaust
Duct
Chrome Plated
Screw, 3 Places
Tab 
Flange
Dacor ● 1440 Bridge Gate Drive, Diamond Bar, CA 91765 ● Tel: (800)
