Dacor DDW24S Verify the Package Contents, Installation Instructions, B C, G H

•	Remove all styrofoam and plastic wrap from the
	dishwasher. Be sure to remove the toe kick from
	the top of the dishwasher packaging. With the
	assistance of at least one person, remove the
	dishwasher from the shipping pallet. Place the
	unit to the side of the cabinet opening. NOTE:
	Since each dishwasher is tested at the factory
	for proper operation, there may be some residual
	water inside the unit, the water supply line or
	drain hose.
•	Remove the “O” ring attached to the water line
	in a plastic bag. Set it aside for use during the
	Water Line Connection.

B C

•	Remove all of the packing materials from inside
	and outside of the unit. DO NOT allow any of
	the shipping materials, loose screws or plastic to
	remain inside.
•	Verify that all required components have been
	provided. Inspect the unit for shipping damage
	(including cosmetic damage). If any item is
	missing or damaged, please contact your
	dealer immediately. Do not install a damaged or

incomplete appliance.

Included:

AToe kick

BMounting hardware (2 screws, 2 spacers)

CPlastic feet (3)

DO ring (comes attached to the water line)

EProduct literature

Tools required for installation:

FLevel

GCrescent wrench

HWire strippers (permanent electrical connections only)

JFlat blade screwdriver K Phillips screwdriver (#2) L Tape measure

M Electric drill with 1 1/2” and 2” drill bits

Materials required for installation (not provided)

NHose clamp (select the correct size clamp for the drain connection...see facing page).

Additional hose and clamps may be required for installation of an air gap according to local code.

Make sure you have everything necessary for proper installation before proceeding.

G H