Dacor DR30GFS, DR30GIFS, DR30GIS manual 9

Installation Specifications

Self-Rimming Installation Cutout Options (Models DR30GIS and DR30GIFS Only)

For all self-rimming installations (without raised vent):

Countertop height: 34 3/4” (88.3 cm) min. 36 7/8” (93.7 cm) max.

Countertop thickness: 1 5/8” (4.1 cm) max.

10” min. (25.4 cm)	Non-combustible	10” min. (25.4 cm)
to any combustibles		to any combustibles
	rear wall required1
above counter both sides		above counter both sides

Rear wall or 1 3/4” min. (1.9 cm) countertop edge countertop overhang

21”

21

1/8”

25 5/8”

20

3/4”

(53.3

cm)

29 1/4” (74.3 cm)

25

3/4”

20

7/8”

(53.7 cm)

max.

(52.7 cm)

to

29 1/4” (74.3 cm)

countertop opening

24”

(65.4 cm)

(53.0 cm)

to

(65.1 cm)

30” (76.2 cm)

countertop opening

(61.0

cm)

max.

30” (76.2 cm)

24 1/8”

cabinet opening

(61.3 cm)

below countertop

cabinet opening

Notch countertop

below countertop

to width of cabinets

Notch countertop

Cabinet face

t

o width of cabinets

Countertop front

below countertop

Cabinet face

Countertop front

below countertop

Cabinets Less Than 24” Deep,			Cabinet Depth Greater Than 24”
Partial Side Panels Installed, Range Back Flush to Wall			Partial Side Panels Installed, Range Back Overhanging
	(Top View)		Countertop (Top View)2
10” min. (25.4 cm)	Non-combustible		10” min. (25.4 cm)	Rear wall or		1” min. (2.5 cm)
to any combustibles		1	to any combustibles		1
above counter both sides	rear wall required		above counter both sides	countertop edge		Countertop overhang

29 1/4” (74.3 cm)

24”

29 1/4” (74.3 cm)

countertop opening

24

1/8”

countertop opening

30” (76.2 cm)

3

(61.0 cm)

cabinet opening

30” (76.2 cm)

3

(61.3 cm)

cabinet opening

below countertop

Cabinet face

below countertop

Cabinet face

below countertop

Notch countertop

below countertop

Notch countertop

overhang to width

of

cabinets

Countertop overhang

o

verhang to width of

cabinets

Countertop overhang

1 5/8” (4.1 cm) max.

1 5/8” (4.1 cm) max.

Cabinet Exactly 24” Deep,

Cabinet Depth Greater Than 25 1/8”

Partial Side Panels Removed, Range Back Flush to

Partial Side Panels Removed, Range Back Overhanging

Wall (Top View)

Countertop (Top View)2

1On models DR30GIS and DR30GIS, a non-combustible surface required immediately behind range, as specified on facing page, when the back of the backguard is less than 2 1/2” (6.4 cm) from rear wall.

2Included rear self-rimming trim piece must be installed to cover the edge of the countertop in back.

3To create a “built-in look” on the front of the cabinet, this dimension may be changed to 29 1/4” (74.3 cm), with the width at the notches remaining 30”. This configuration is only for models DR30GIS and DR30GIFS with the side panels removed.

7